Thrust ball bearings are classified into those with flat seats or aligning seats depending on the shape of the outer ring seat (housing washer). They can sustain axial loads but no radial loads. For Single-Direction Thrust Ball Bearings, pressed steel cages and machined brass cages are usually used The cages in Double- Direction Thrust Ball Bearings are the same as those in Single-Direction Thrust Ball Bearings of the same diameter series.
Features
Available in two designs: single direction and double direction.
To accommodate initial misalignments in an assembly both designs are available with spherical aligning seats or aligning seat washers.
High quality steel-ultra clean steel to extend bearing life by up to 80%.
Advanced Grease Technology — NSK lubricants that can extend grease life and performance.
High Grade Balls — Quiet and smooth operation even at high speed.
Optional seating rings take initial misalignment.
Bearing number | 54305U+U305 |
Brand | ISO |
Bore Diameter (mm) | 27 |
d | 27 mm |
d1 | 20 mm |
D1 | 55 mm |
D2 | 38 mm |
T | 42 mm |
thrust ball bearings are manufactured as single direction or double direction thrust ball bearings. They are designed to accommodate axial loads only and must not be subjected to any radial load.
In addition to the bearings presented in this section, supplies thrust ball bearings for special application requirements. This assortment includes bearings with Solid Oil and NoWear coated bearings.
&&&&&&&& | ||||||||
Size (mm) | ||||||||
53236U | - | |||||||
54305U+U305 | - | |||||||
FT32 | - | |||||||
511/630-FP | - | |||||||
FT16 | - | |||||||
51230M | - | |||||||
51411 | - | |||||||
51434 | - | |||||||
N 312 ECM | 60 mm x 130 mm x 31 mm | |||||||
F15031 | - | |||||||
54218 + U218 | 75 mm x 135 mm x 14 mm | |||||||
51116 | - | |||||||
NU 312 ECM | 60 mm x 130 mm x 31 mm | |||||||
51415 | - | |||||||
NU 2292 MA | 460 mm x 830 mm x 212 mm | |||||||
53432X | - | |||||||
ESA 25 0855 | - | |||||||
GT8 | - | |||||||
EB1.25.0755.201-2STPN | - | |||||||
NU 328 ECM | 140 mm x 300 mm x 62 mm | |||||||
51152 M | - | |||||||
53409 | - | |||||||
52408 | - | |||||||
51204 | - | |||||||
2910 | - | |||||||
ZKLN1545-2Z | 15 mm x 45 mm x 25 mm | |||||||
52322 | - | |||||||
2009 | - | |||||||
53207U+U207 | - | |||||||
51208 | - | |||||||
51205 | - | |||||||
NU 19/670 ECMA | 670 mm x 900 mm x 103 mm | |||||||
51114 | - | |||||||
NU 309 ECNP | 45 mm x 100 mm x 25 mm | |||||||
75TVB344 | - | |||||||
NUP 204 ECP | 20 mm x 47 mm x 14 mm |
Copyright © 2017 - 2024BOYAL INDUSTRIES GMBH All Rights Reserved